Complete Hydroponic Grow Room Tent Fan Filter Light Kit LED 60x60x160

Complete Hydroponic Grow Room Tent Fan Filter Light Kit LED 60x60x160

Complete Hydroponic Grow Room Tent Fan Filter Light Kit LED 60x60x160

Complete Hydroponic Grow Room Tent Fan Filter Light Kit LED 60x60x160. Quality Hydroponic Grow Room Tents.

95 % reflective hammered silver lining. Metal poles (please make sure these a pushed all the way in on the side clip provided). (we found the easiest way to put up is fix bottom half first then top part and start from the back). PowerPlant Heavy Duty Timer - Please select if needed. PLease select which LED you require.

Power Consumption: energy saving, consumes 120W. Led chip: Epistar, double chips. LED Quantity: 60PCS 10W LEDs. Coverage Area: 3 about 3.6 x 4 Square Feet (The lighting area and the height are changeable according to different plants and environments).

Colour: red 39pcs, blue 11pcs, orange 4pcs, white 4pcs, IR 1pcs and UV 1pcs. Full Spectrum: 430440nm, 450475nm, 620630nm, 650660nm, 3500K and 6000k, IR 730nm, UV 410nm.

Power Consumption: energy saving, consumes 190W. LED Quantity: 100PCS 10W LEDs. Coverage Area: about 4.2 x 4.6 Square Feet (The lighting area and the height are changeable according to different plants and environments). Colour: red 71pcs, blue 14pcs, orange 8pcs, white 4pcs, IR 1pcs and UV 1pcs. Power Consumption: energy saving, consumes 260W. LED Quantity: 150PCS 10W LED. Coverage Area: about 6.5 x. 6.5 Square Feet (The lighting area and the height are changeable according to different plants and environments). Colour: red 108pcs, blue 20pcs, orange 10pcs, white 10pcs, IR 1pcs and UV 1pcs. Power Consumption: energy saving, consumes 375W. LED Quantity: 200PCS 10W LEDs. Coverage Area: about 7.5 x.

7.5 Square Feet (The lighting area and the height are changeable according to different plants and environments). Colour: red 132pcs, blue 36pcs, orange 14pcs, white 14pcs, IR 1pcs and UV 1pcs. FAN, ALUMINIUM DUCTING, CARBON FILTER, CLAMPS X 3. Centrifugal fan - 110 m3/h - comes with stand attached to screw to floor (can not see in picture). To get the most out of your kit, please follow these few tips.

Remember, if you reverse-mount your Filter you will lose the benefit of your pre-filter and reduce the life of the carbon. Always mount your filter as high as possible.

Hot air naturally rises and so will your odours! Try not to block too much of the filter with mounting straps or hanging devices. Use the ends of the filter to support, so not to inhibit the surface area of the filter. Do Not mount your Filter near to humidifiers. Humid air over 85% may enter the filter rendering the activated carbon ineffective and your filter may NOT neutralise odours!

Ensure you have an airtight seal around the connection of your filter to ducting or extractor fan. The item "Complete Hydroponic Grow Room Tent Fan Filter Light Kit LED 60x60x160" is in sale since Thursday, November 8, 2018. This item is in the category "Garden & Patio\Hydroponics & Seed Starting\Other Hydroponics". The seller is "hydroponics4less" and is located in Solihull. This item can be shipped worldwide.


Complete Hydroponic Grow Room Tent Fan Filter Light Kit LED 60x60x160


Homepage  Archives  Contact  Privacy Policies  Service Agreement